Step 4: Connecting The Decoder (If Required) - LiteOn HD-A940G User Manual

Step 4: Connecting the Decoder (If Required)

For PAY-TV/CANAL+ subscribers, you will need to connect an additional decoder to your TV and DVD
recorder.
1
Refer to Step 1 to connect your DVD recorder to the antenna outlet on the wall, and then to the RF IN jack on the
television, if you have not established the connection.
2
Use a SCART cable to connect the SCART IN jack on the DVD recorder to the SCART OUT jack on the CANAL+
decoder.
3
Use a SCART cable to connect the SCART OUT jack on the DVD recorder to the SCART IN jack on the televi-
sion.
Completed in Step 1

During recording, if you have problem watching programs imported via decoder, you can press TV (MODE) to switch to
the 'SCART Bypass' mode. However, you need to fi rst activate the feature through SetupVideo Input/Output TV
MODE.

Setting TV MODE/SCART Bypass (p.25)

Depending on the cable manufacturers, the SCART cable you use may not be able to detect all signals transferred via
this connection. If you have activated the 'SCART Bypass' mode through the Setup menu, and still have problem using
the feature, try to use a new SCART cable to connect the decoder to your DVD recorder.
T V
RF IN SCART IN
SCART
OUT
RF OUT
TUNER
SCART IN (AUX/DECODER)
RF IN
SCART
IN
CANAL+ Decoder
Wall
20
SCART OUT