Panasonic Viera TX-32A400B Operating Instructions Manual page 9

Indicator / Control panel
1 Remote control signal receiver
● Do not place any objects between the TV remote
control signal receiver and remote control.
2 Power indicator
Red: Standby
Green: On
● The LED blinks when the TV receives a command
from the remote control.
3 (POWER)
● Switches TV on or off.
● To completely turn off the TV, please remove the
mains lead from the wall socket.
4
● Selects an input source.
● Confirms and enters a selection on the On-Screen
Display Menu.
5
● Opens or closes the On-Screen Display Menu.
6
● Changes volume.
● Adjusts the value of the selected item on the
On-Screen Display Menu.
Note
● If the TV is turned off by (POWER) button on the bottom of the TV, you cannot switch TV power on by
the remote control. Please press
Using the On-Screen Displays - Operation guide
Many features available on this TV can be accessed via the On-Screen Display menu.
„ Operation guide
Operation guide will help you to operate by using the
remote control.
Example: [Sound]
Sound
Main Menu
Mode
Picture
Bass
Sound Treble
Balance
Network
Headphone Volume
Surround
Timer
Auto Gain Control
Volume Correction Volume Correction
Setup
Speaker Distance to Wall
Preferred Audio 1
Select
Change
RETURN
Operation guide
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
• [Off Timer] is active in the [Timer]. (p. 21)
• No operation is performed for the period selected in [Auto Standby]. (p. 21)
1 2
7
● Changes channels.
● Selects item on the On-Screen Display Menu.
(POWER) button again on the bottom of the TV to turn the TV on.
„ How to use remote control
MENU
1/2
OK
Music
0
0
0
20
OK
O
O
0
BACK/
Over 30cm
RETURN
French
Page up
EXIT
Page down
3 4 5 6 7
Bottom side
button of
● Open the main menu
● Move the cursor / select from a
range of options / select the menu
item (up and down only) / adjust
levels (left and right only)
● Access the menu / store settings
after adjustments have been made
or options have been set
● Return to the previous menu
● Exit the menu system and return to
the normal viewing screen
9