Table of Contents
Advertisement
Menu
Item
Reset to Defaults
Mode
Equaliser
Bass
Treble
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance
to Wall
Preferred Audio 1
Preferred Audio 2
MPX
Adjustments / Configurations (alternatives)
Press
button to reset the current Picture [Viewing Mode] of the selected
input to the default settings.
Selects your favourite sound mode. [Music] / [Speech] / [User]
●
The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
●
Common sound settings are applied for [Music] and [Speech] mode but
[Bass] and [Treble] settings are applied for each mode independently.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite
sound quality.
●
For the [User] mode, [Equaliser] will appear on the [Sound] instead of
[Bass] and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Adjusts the frequency level to suit your favourite sound quality.
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the cursor
button.
●
To enhance the bass sound, raise the level of the lower frequency.
To enhance the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select
[Reset to Defaults] by using the cursor button, and then press
Adjusts level to enhance or minimise lower, deeper sound output.
Adjusts level to enhance or minimise sharper, higher sound output.
Adjusts volume level of right and left speakers.
Adjusts the volume of the headphones.
Surround sound settings. [Off] / [On]
Automatically regulates large sound level differences between channels and
inputs. [Off] / [On]
Adjusts the volume of individual channel or input mode.
Compensates for the low frequency sound due to the distance between the
speakers and the wall. [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue mode
button.
19
Hide quick links:
Advertisement
Table of Contents
