Panasonic Viera TX-32A400B Operating Instructions Manual page 16

Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
ASPECT
Programmes usually contain an "Aspect Control Signal" (Widescreen signal, etc.), and the TV will choose
the aspect ratio automatically according to the aspect control signal.
„ If you would like to change the aspect ratio manually
1
Display [Aspect Selection] list
ASPECT
[Aspect Selection] list
[Auto]
The aspect ratio works automatically based on programmes signal format.
[16:9]
Directly displays the image at 16:9
without distortion (anamorphic).
[14:9]
Displays the image at the standard
14:9 without distortion.
[Just]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
[4:3]
Displays the image at the standard 4:3
without distortion.
Note
● Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the [Picture]. (p. 18)
● Not available in teletext service.
16
2
While the list is displayed,
select the mode
Aspect Selection
Auto
16:9
OK
14:9
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
Change EXIT
RETURN
[4:3 Full]
[Zoom 1]
[Zoom 2]
[Zoom 3]
● You can also change the mode
select
only using
ASPECT
(Press repeatedly until you
access
reach the desired mode)
Displays a 4:3 image enlarged
horizontally to fit the screen.
● HD signal only
Displays a 16:9 letterbox or 4:3 image
without distortion.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
Displays a 2.35:1 letterbox
(anamorphic) image full-screen without
distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
button.