Operation Temporary Override And Hold Function - Control M6001A Instruction Manual

Operation
Temporary Override
This function will allow you to change the temperature setting, until the start time of the next program period.
1. Press ▲ or ▼ to manually adjust to the desired temperature setting.
Note:
The temperature can be set in increments of 0.5ºC or 0.5ºF.
The temperature setting range is from 5-35ºC (41-95ºF).
Press and hold ▲ or ▼ button down to accelerate the settings.
The thermostat will automatically return to the regular program at the next scheduled program period.
Hold Function
This function maintains a constant temperature and disables temperature program periods.
1. Press the HOLD button once to enter the Hold mode. (HOLD symbol will appear.)
When Hold mode is activated, you may manually adjust the temperature by pressing ▲ or ▼. However, all
programs will be disabled. If no temperature changes are manually selected, the current temperature setting will
remain the same indefinitely.
2. To cancel the Hold function, press the HOLD button again. (HOLD symbol will disappear.)
The temperature will automatically return to the
programmed temperature for that time period.
HOLD SYMBOL
20