Reset Programs / All Settings - Control M6001A Instruction Manual

Programming

Reset Programs / All Settings

If you have difficulties programming your thermostat, you may wish to reset the unit to begin again.
Reset Programs - to delete all CUSTOM programs
1. Press SET for three seconds to enter Options mode.
2. Press PROG for three seconds to clear all custom programs.
Note: This action will restore custom programs to the factory-default programs only,
but will not affect the clock time or option settings.
Reset All Settings - to delete all settings
1. Remove the thermostat faceplate to reveal the RESET button (Page 7).
2. Press HOLD and RESET buttons at the same time to clear all settings.
Note: This is a total reset, which clears settings for custom programs, clock time and option settings.
The unit will be restored to factory-default settings.
19