How To Adjust Stitch Length; Sewing For Curved Seams - White 7234 Instruction Book

3-7. How to Adjust Stitch Length
The machine is pre-set to a 2.5mm stitch length
for regular seaming and overedging. You may
adjust the stitch length from 1mm (Narrow rolled
hemming) to 5mm by one-touch of the stitch length
adjustment lever.
+ For normal overedging set the stitch length
from 2,5mm to 5mm. A stitch length less than
2.5mm is used only for rolled hemming.
3-8. Sewing for
Curved
Seams
For a neat and clean finish of curved seams:
For inside curves, guide the fabric gently with
the trimming line of the fabric under the right
front of the presser foot, applying pressure to
the fabric with your left hand, at the same time,
apply a little pressure in the opposite direction
with your right hand as shown.
For outside curves, apply pressure in the opposite
directions of the above.
—12—