Adjustment For Size Of Bight - White 7234 Instruction Book

3-6. Adjustments for Size of Bight.
• AdjuM the size of the bight from 4.2mm (0.16")
to 60mm (023") according to the kind of
material.
I
• The standard bight size is 4.5mm (0.17")
IL:
..
• Open the side cover to adjust the bight size.
-
(1) If the cutting width is narrower than the bight
size, turn the bite width adjusting dial to the direc-
.R
tion of arrow. (To bigger number)
—
_--
//
4k
(2) If the cutting width is wider than the bight size,
turn the bite width adjusting dial to the direction of
the arrow. a smaller number)
The right figure shows that the size of the bite
7
between the left needle and the edge of the
material 4.5mm.
—11—