Disassembly & Reassembly - Samsung SyncMaster CSH7839L Service Manual

5 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
CSH7839L/CSH9839L monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
5-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
5-1-1 Before making Disassembly
1. Disconnector signal cable and power cord
from the monitor.
2. With a pad beneath it, stand the monitor on its
front with the screen facing downward and
the base close to you.
3. Make sure nothing will damage the screen.
5-1-2 Cabinet Disassembly
1. To uncover the 2 uppermost screws. Press in
the end of each screw cap and pull it away
from the cabinet.
2. Remove the 4 screw on the Rear Cover and
pull it toward to remove it.
Figure 5-1
5-1-3 Removing the Stand
1. Pull the tab outward on the Chassis Bottom
and pull the Tilt and Swivel Base up to
remove it.
CSH7839L/CSH9839L
5-1-4 Removing the Top Shield
1. Remove the 4 screws on the Top Shield Cover
and remove the Shield.
Figure 5-2
Figure 5-3
5-1