Panasonic JT-B1 series Operating Instructions Manual page 17

Interface Cable
Use of an interface cable longer than
3 m { 9.84 feet } is not recommended.
For UK
<Models for UK>
For your safety, please read the
following text carefully.
This appliance is supplied with a molded
three pin mains plug for your safety and
convenience.
A 3 ampere fuse is fitted in this plug.
Should the fuse need to be replaced
please ensure that the replacement fuse
has a rating of 3 ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
mark on the body of the fuse.
If the plug contains a removable fuse cover
you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained. A replacement fuse cover can be
purchased from your local dealer.
If the fitted molded plug is unsuitable for
the socket outlet in your home then the
fuse should be removed and the plug cut
off and disposed of safely.
There is a danger of severe electrical
shock if the cut off plug is inserted into any
13-ampere socket.
How to replace the fuse
The location of the fuse differs according to
the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow
11-E-1
the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver
and replace the fuse and close or attach
the fuse cover.
Figure A
or the BSI
collection center, registered dismantler or
recycler, or Panasonic service center when
disposing of this product.
Please see the Panasonic website for
further information on collection centers, etc.
http://www.panasonic.co.in/wps/portal/home
For India
For the purpose of recycling to
facilitate effective utilization of
resources, please return this
product to a nearby authorized
Figure B
Fuse cover
17