To Re-Load A Stitch Program; Program Pop-Up Messages - Husqvarna Viking Sapphire 960Q User Manual

TO RE-LOAD A STITCH PROGRAM

another stitch and then re-opening the Program mode, your
mode is closed, the stitch program will be loaded and ready
to be sewn.
U-menu and make changes to the programmed stitch in
Program mode.
Note: If the machine is turned off the program disappears from the
Program Mode. Remember to save your program before turning the
machine off.

PROGRAM POP-UP MESSAGES

Not a Programmable Stitch
for example buttonholes.
Stitch Program Out of Range
The stitch you are trying to add will make the stitch
program too long.
or contain more than 99 stitches. If the stitch program
exceeds the maximum length or amount of stitches, this
pop-up message will let you know.
P 5:5
ROGRAM