Sony Bravia XBR-52LX900 Setup Manual page 27

Secured Network without Wi-Fi Protected Setup (WPS)
For setting up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key)
will be required. If you do not know them, consult the instruction manual of your router.
1
Select "Wireless Setup" from the "Network Setup" start-up screen.
2
Select "Scan:' then select a network from the list of scanned wireless networks.
3
Follow the instructions that appear on the setup screen.
Unsecured Network with Any Type of Wireless LAN Router
For setting up a wireless LAN, SSID (wireless network name) will be required. Security key ("VEP or
WPA key) will not be required because you need to select no security method in this procedure.
1
Select "Wireless Setup" from the "Network Setup" start-up screen.
2
Select "Scan:' then select a network from the list of scanned wireless networks.
3
Follow the instructions that appear on the setup screen.
Checking the Network Status
Enter the respective alphanumeric values for your router if necessary. The items that need to be set
(e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or
router. For details, refer to the instruction manuals provided by your Internet service provider, or
those supplied with the router.
1
Select "Auto" to set the IP Address and proxy server automatically, or "Custom" to set them
manually.
2
Follow the instructions that appear on the setup screen.
• If you use WPS for network setup, the security settings of the wireless LAN router activate, and any
equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the
network.
In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can
deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-
secure status.