Running Initial Setup; Detaching The Table-Top Stand From The Tv - Sony Bravia XBR-52LX900 Setup Manual

Running initial setup

1
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2
Check the ENERGY SAVING
SWITCH setting is on (z).
3
Press POWER on the TV.
When you switch the TV on for the first
time, the Language menu appears on
the screen.
4
Follow the instructions on the screen.
~
• The ENERGY SAVING SWITCH must be on
(z) to set the clock and obtain program
information for the TV Guide.
• Home mode sets the TV to settings optimized for
home viewing (this setting is ENERGY STAR
compliant).
5
Select Continue to scan for available
channels and enable the TV Guide On
®
Screen
feature. If you receive
channels from a cable box or satellite
receiver and do not wish to use the
TV's built-in tuner, select Skip.
Selecting Skip will disable the TV
Guide On Screen feature, which is
only available when the TV's tuner is
used.
~
• If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
14
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with
POWER
the TV.
~
• Remove the stand rear cover and bottom cover
prior to detaching the Table-Top Stand.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When installing the TV on a wall, remove the four
screws from the rear of the TV. (They are fastened
in the screw holes for wall mounting.) Be sure to
store the removed screws in a safe place, keeping
them away from children.
• When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of the
TV.
on