Table of Contents
Advertisement
Lens attachment and detachment
•
Check that the power switch is set to OFF.
■
Attaching a lens to the camera
1
Turn the lens rear cap and body cap in the direction indicated by the arrows and remove.
Lens rear cap
•
Do not insert fingers into the mount.
2
Line up the lens attachment marks (red) on the camera and lens, and then turn the lens in the
direction indicated by the arrows until it audibly clicks into place.
•
Do not press the lens detachment button while attaching
the lens.
•
Damage may occur to the lens attachment if the lens is
not at right angles to the camera during attachment.
•
Ensure that the lens is attached properly.
3
Remove lens cap.
•
Remove lens cap prior to recording.
Lens detachment
button
Body cap
E-10
Hide quick links:
Advertisement
Table of Contents
