Bluetooth - Kenwood KMM-BT308U Instruction Manual

SiriusXM settings
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SIRIUS XM],
then press the knob.
3 Turn the volume knob to make a selection
(see the following table), then press the
knob.
4 Press and hold to exit.
To return to the previous setting item or
hierarchy, press .
There are two types of lock functions available:
• SiriusXM-defined: When [MATURE CH] is set to [ON]
• User-defined: Using [CHANNEL EDIT] when [MATURE
CH] is set to [OFF]
CHANNEL To unlock settings:
1 Turn the volume knob to select a number.
LOCK
2 Press S / T to move to the entry
position.
3 Repeat steps 1 and 2 to enter the current
pass code. (Initial pass code is 0000.)
4 Press the volume knob to confirm.
1 Turn the volume knob to select a number.
CODE SET
2 Press S / T to move to the entry
position.
3 Repeat steps 1 and 2 to enter a new
4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass
code.
• Make a note of the new pass code to enter
channel lock settings from next time.
CHANNEL EDIT * 1 Turn the volume knob to select a
CHANNEL
CLEAR*
MATURE CH
Default: XX
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
* Displayed only when [MATURE CH] is set to
[OFF].
SiriusXM® Radio
category, then press the knob.
2 Turn the volume knob to select
a channel you want to lock, then
press the knob. "L" appears in front
of the channel number.
3 Press and hold to exit.
YES: Clears all the locked channels. ;
NO: Cancels.
ON: Turns on the SiriusXM-defined lock
setting (mature channel). ; OFF: Turns
off.
• If [ON] is selected, your setting
[CHANNEL EDIT] is temporary
ignored.
WEAK/ GOOD/ STRONG: Shows the
strength of the current received signal.
0% — 100% (0): Shows the memory
usage for Replay buffer.
YES: Resets stored channel, locked
channel setting and Mature CH setting
to default. ; NO: Cancels.
BLUETOOTH®
You can operate Bluetooth devices using this
unit.
Connect the microphone
Rear panel
Microphone
input jack
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
If you turn off the unit or detach the control
panel during a phone call conversation,
the Bluetooth connection is disconnected.
Continue the conversation using your mobile
phone.
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
ENGLISH |
Microphone
(supplied)
11