Lcd Display Indicators - Frigidaire FASC09F2MBHLW Instruction Manual

TURBO*: Active/Disable TURBO
11
function. If pushing more than 2
seconds, the SELF CLEAN
function will be activated, pushing
more than 2 seconds again to
disable(depending on
models).During the heating
operation(only when the setting
mode is HEAT),press this button
and the unit will operate at a
setting temperature of 8°C.The
display window of indoor unit will
display FP. Press the buttons of
ON/OFF, SLEEP, FP, MODE,FAN
SPEED,UP,DOWN and
SHORTCUT while operating will
cancel the FP
LED: Disable/Active indoor screen
12
Display. When pushing more than
2 seconds, the FOLLOW ME
function will be activated, pushing
more than 2 seconds again to
disable.
LOCK: When you press the
13
recessed LOCK button, all current
settings are locked in and the
remote controller does not accept
any operation except that of the
LOCK. Press again to cancel the
LOCK mode.
14
SHORTCUT: Used to restore the current settings or resume previous settings.
On the first time connecting to the power, if push the SHORTCUT button, the
unit will operate on AUTO mode, 24°C, and fan speed is Auto.
Push this button when remote controller is on, the system will automatically
revert back to the previous settings including operating mode, setting
temperature, fan speed level and sleep feature(if activated). And transmit the
signals to the unit.
If push this button when remote controller is off, the system will only resume
the previous settings and will not transmit the signals to the unit. And the
sleep feature is disable. If pushing more than 2 seconds, the system will
automatically restore the current operation settings including operating mode,
setting temperature, fan speed, level and sleep feature (if activated).
37
1
7
2
13
3
8
5 9
4 10
11
12
13
6

LCD display indicators

1
TRANSMISSION INDICATOR: This
transmission indicator lights when
remote controller transmits signals
to the indoor unit.
MODE: Displays the current
2
operation mode. Including
auto ( ), cool( ), dry(
heat( ) (Not applicable to cooling
only models), fan( ) and back to
auto( ).
3 ON/OFF: Displayed by pressing the
ON/OFF button. Press the ON/OFF
button again to remove.
4 TEMP/TIMER: Displays the
temperature setting(17°C~30°C).
When you set the operating mode
to FAN, no temperature setting is
displayed. And if in the TIMER
mode, shows the ON and OFF
settings of the TIMER.
5
FOLLOW ME: Displayed when
FOLLOW ME function is activated.
6 LOCK: Displayed when LOCK
mode is activated.
7
SLEEP: Displayed under sleeping
operation. Press the SLEEP button
again to remove.
2
auto cool dry heat fan
1
SET TEMP. TIMER ONOFF
),
sleep follow me lock run
F
7 5 6
8 FAN SPEED: Displays the
selected fan speed, AUTO(no
display) and three fan speed levels
" " (LOW) " " (MED) " " (HIGH)
can be indicated. The fan speed is
AUTO when the operating mode is
either AUTO or DRY.
4
3
38