Replacement Of Voltage Regulator Ic (Ic2010) - Panasonic SA-AKX95LMK Service Manual

Caution: During assembling, ensure that the earth plate is
bended flat against the Main P.C.B. properly before insert-
ing into the slots of the bottom chassis..
11.14. Replacement of Voltage Regu-
lator IC (IC2010)
• Refer to "Disassembly of Main P.C.B.".
11.14.1. Disassembly of Voltage Regulator
IC (IC2010)
Step 1 Desolder pins of the Voltage Regulator IC (IC2010) on
the solder side of the Main P.C.B..
Step 2 Remove the Voltage Regulator IC (IC2010) from the
Main P.C.B..
11.14.2. Assembly of Voltage Regulator IC
(IC2010)
Step 1 Fix the Voltage Regulator IC(IC2010) on the Main
P.C.B..
Caution: Ensure pins of the Voltage Regulator IC (IC2010)
are properly inserted into the Main P.C.B..
46