Before You Start; Utilization Of The Product; Important Safeguards - Hyundai H-MS1101 Instruction Manual

Utilization of the product

If you want to dispose this product, do not mix it with general household waste.
There is a separate collection system for used electronic products in accordance
with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By
doing so, you will ensure that your disposed product undergoes the necessary
treatment, recovery and recycling and thus prevent potential negative effects on
the environment and human health.

Important safeguards

Alerts the user to the presence
of dangerous voltage within the
product's enclosure.
Alerts the user to the presence
of important operating
instructions.
To reduce the risk of electric
Warning Warning
shock or fire, do not open the
RISK OF ELECTRIC SHOCK
cover. Refer servicing to qualified
DO NOT OPEN
service personnel.
This mark indicates this unit
belongs to class 1 laser product.
• To prevent the risk of fire or electric
shock, don't allow water to come into
contact with the device and don't use the
device in high humidity conditions.
• The device is equipped with high
voltage components and a laser system,
hence you shall not open the device and
repair it by yourself. The laser beam is
dangerous to eyes when the housing is
removed. Don't look at it.
• When the device is moved from cold

Before you start

premises to the warm room or vice versa,
condensate may form on the laser head
and the device may not operate properly.
In this case please turn the device on for
1-2 hours without disc before playback to
heat it to a proper operation temperature.
• Don't try to manually open or close
the disc tray to load discs.
• Disconnect the receiver only when
there is no disc therein.
• If you are not going to use the device
for a long time disconnect it from the wall
outlet.
• Before turning the device on, please
make sure that you have connected it
properly, adjust the volume of speakers
and amplifiers of your system to the
minimum. Adjust the volume as necessary
only after normal playback has started to
avoid damage of your audio system.
• Use supply sources of rated voltage,
otherwise the unit may not function or
may be damaged.
• Place the unit on a horizontal surface.
Keep the unit ventilated. Don't block
the heat hole. Overheat may cause
malfunction.
• Do not place any objects on
3