Cursor Buttons; Enter; S.effect; Ch-Level - Hyundai H-MS1101 Instruction Manual

Operation
• In Radio mode use this button to
select the Mono or Stereo mode.

Cursor buttons

Press cursor buttons for navigation in
various menus.

ENTER

Press ENTER button to confirm input
data or selected options.

S.EFFECT

Press S.EFFECT button to change the
surround sound (DSP 1-6) effect.

CH-LEVEL

Press this button to select left or right
channel, then press VOL buttons to adjust
its level.

TONE

Press TONE button to select bass or
treble frequency, then press VOL buttons
to change the volume of the selected
frequency.

USB

Insert the USB device into the slot on
the front panel. Press USB button to play
content of the USB device.

SYSTEM

Press SYSTEM button; the display will
show picture setup menu using which
you can adjust contrast, brightness, color,
sharpness, display aspect or to reset your
adjustments. Press SYSTEM button to
quit the menu.

ZOOM

• When playing DVD, SVCD, VCD disc,
press ZOOM to zoom in or zoom out the
12
picture.
• In zoom in mode, press cursor to
move the picture for viewing. The picture
cannot be moved in zoom out mode.

REPEAT

Press REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing DVD disc, press
REPEAT button continually to repeat
chapter => title => all => repeat off.
• When playing SVCD, VCD, CD disc,
press REPEAT button continually to
repeat track => all => repeat off.
• When playing MP3 disc, press
REPEAT button continually to play folder
=> single => repeat track => repeat folder.
A - B
• Press A-B button at the start point
(A) and the ending point (B) to select the
repeat fragment.
• Press A-B button the third time to
cancel fragment repeat and return to
normal play.
When playing DVD/VCD/SVCD/CD
disc, press button once, the unit
will memorize the previous ending point.
Press button to continue playback.
Press button twice; not playback can
only be resumed from the beginning of
the disc.

System setup

1. Press SETUP button to enter the setup
menu. In Setup menu, press SETUP
button again to quit the setup page.
2. Use / buttons to choose a setup