Base - GE DCCH480EK Technical Service Manual

Base

The base is made of plastic. The water reservoir for
the pump is part of the base. It can be replace if
damaged.
To remove the base:
1. Remove the motor assembly and condensate
pump. (See
Motor Assembly
.)
Pump
2. Remove wiring harness from the base.
3. Remove the 4 Phillips-head screws that secure
the base to the front of the dryer frame.
4. Remove 9 Phillips-head screws and base from
the dryer.
and
Condensate
Wiring Harness
Base
– 44 –