GE DCCH480EK Technical Service Manual page 17

Kit Contents (GE Kit #GE24STACK)
Bracket-
stack (R)
Tools Needed
Phillips-head Screwdriver
Level
Gloves
Installation Preparation
Remove the packaging.
Flatten the product carton to use as a pad to lay the
dryer down on its side. Continue using the carton to
protect the fi nished fl oor in front of the installation
location.
Installing the Stack Bracket Kit
1. Carefully lay the dryer on its side. Use the
Screws (4)
Rubber
pads (4)
Bracket-
stack (L)
2. Remove the dryer leveling legs.
3. Locate the 4 rubber pads in the parts package.
4. Set the dryer upright.
– 17 –
packing material so you don't scratch the fi nish
on the dryer.
Unscrew and remove
all 4 leveling legs
Insert rubber pads into the leveling leg holes.
(Continued Next Page)