R-798 English
25/06/2004
Your oven has two operating modes, Energy Save Mode and Clock Set Mode.
The difference between them is that when you are not using the oven, in Energy save Mode nothing will
appear on the digital display and in Clock Set Mode the time will be shown.
In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. closing the door, pressing
the STOP key, or at the end of cooking), you will not be able to operate the oven.
To restore power on, open the door.
If you set the clock, energy save mode will be cancelled.
To start energy save mode manually, follow the instructions below.
Example:
To start the energy save mode (the current time is 23:35):
1. Make sure the
correct time
appears on the
display.
Display:
11:19
Page 9
3. Adjust the display
2. Press the
to 0 by rotating the
INFO/CLOCK
TIME/WEIGHT
button twice.
dial.
x2
USING THE STOP BUTTON
ENERGY SAVE MODE
4. Press START
The power will be off and
the display will show
nothing.
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press
the STOP button twice.
9
button.
x1