Usb/Sd/Mmc Operation; Ripping - Hyundai H-MS1101 Instruction Manual

button function menu.
The button function menu is as follows:
Button
Entering thumbnail mode
Next picture
Previous picture
To play picture
Rotate 90 degrees
anticlockwise
Rotate 90 degrees clockwise
Select CONTINUE item and press ENTER
button to go to the other menu page:
ZOOM Change zoom mode
Zoom in picture
Zoom out picture
Cursor
Move zoom center
buttons
Select EXIT MENU item and press ENTER
button to exit.
Depending on file volume and encoding,
some delay is possible when changing modes
or passing to the next menu item.

USB/SD/MMC operation

Insert a USB drive in the USB port, then
press USB button to play the readable files
in it. Press USB button again to switch to the
DVD mode.
Insert a SD, MS or a MMC card into the SD/
MMC/MS card slot, then press USB button to
play readable files in it.
Press USB button again to switch to the
DVD mode.
If a USB drive and a memory card are
Function
inserted at the same time, press USB button
once to select USB and press it twice to select
memory card. Press it for the third time to
return to the DVD mode.
SD/MMC up to 4 Gb are supported by this
unit. USB up to 8 Gb is supported.

Ripping

This unit has Ripping function making it
handy and quick to copy audio files (e.g.
music) from CDs. RIPPING is converting from
CDDA format to the compressed MP3 format
onto a USB drive. In the course of copying, ID3
tags are generated automatically in Russian
and English, depending on the source. If the
disc does not contain such information in
CD-text format, ID3 tags will be written as
"Unknown artist" and "Unknown album".
RIPPING function has a simple and intuitive
menu. To display the Ripping menu, press
MENU/RIPPING button on the RC while CD
playback. A USB-drive should be connected to
the unit.
Create ID3 Yes
For navigation in the menu use cursor
buttons and press ENTER button to confirm
your option. In "Options" column you may
set speed and bit rate for ripping. In "Track"
column you may select tracks for ripping (press
ENTER button to select a highlighted track).
Besides, you can select all tracks ("Select all")
or cancel your choice ("Select none"). To start
converting process, select "Start" and press
ENTER button.
Operation
17