Changing The Battery; Button Functions; Standby; Open/Close - Hyundai H-MS1101 Instruction Manual

Operation

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• Use two AAA/1.5V batteries for the RC.
The RC should be pointed at remote sensor
within 8 meters and within 30 degrees at the
left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

Button functions

STANDBY

When playing, press STANDBY button,
the unit will be power-off and go to standby
state; Press STANDBY again, the unit will be
switched on and start playing.
Warning: The power is not fully cut off at
standby state. If the unit will not be used for
a long time, turn off the power by pressing
STANDBY button on the front panel.
You can also switch off the unit by
pressing STANDBY switch on the panel.

OPEN/CLOSE

Press OPEN/CLOSE button when power
on, the disc tray is pushed out. Put the disc on
10
the tray with the title faced up. Press OPEN/
CLOSE again to close the disc tray and the
unit starts playing automatically. (Without auto-
play function for MP3 and JPEG discs).

Number buttons

Press number buttons to input digits
(channel numbers, playback time etc.).

GOTO

Press GOTO button to enter the menu
enabling to select playback start time for the
title, track or chapter, and to set some other
playback parameters.

SETUP

Press SETUP button, the on-screen setup
menu will be display.

(PLAY/PAUSE)

When playing the disc, press PLAY/PAUSE
button on the unit or
to pause, press the button again to return to
normal play.

(Mute)

Press button, no sound will be heard
and the mute symbol will display on the TV
screen. Press button again, and the
sound will resume.
TFT ON/OFF
Press this button to switch off the display.
Press again to return to normal picture.

ANGLE

When playing the disc with multi-angle,
press ANGLE button to change view angle.

V-MODE

Press V-MODE button to switch the video
output mode (YUV/RGB/OFF).

PROG

• If the disc has 2 or more tracks, chapters
or titles, set up the playing order to your
preference. Press PROG button to enter
button on the RC