Hookups And Settings; Hooking Up The Recorder; Step 1 Unpacking; Step 2 Connecting The Antenna Cable - Sony RDR-VXD655 Operating Instructions Manual

·
.
17I()()l(tJ~s amel Settimgs
..:c "' '"
~ ~
Hooking Up the Recorder
Follow steps 1 to 7 to hook up and adjust the
settings of the recorder
• Plug cords securely to prevent unwanted nOise
• See the InstructIons supplIed With the components to be
connected
• You cannot connect thIs recorder to a TV that does not
have a video Input Jack
• Be sure to disconnect the power cord of each
component before connectIng Do not connect the
power cord untIl you reach "ConnectIng the Power
Cord" on page 26
Step 1: Unpacking
Check that you have the following Items
• Audio/video cord
(phono plug x 3
+--+
phono plug x 3) (1)
• Antenna cable (1)
• Remote commander (remote) (1)
• Size AA (R6) battenes (2)
Step 2: Connecting the
Antenna Cable
Select one of the follOWing antenna hookups Do
not connect the power cord unttl you reach
"Connecting the Power Cord" on page 26
If you have Hookup
Cable box or satelhte receIver WIth a A (page 18)
VIdeo/audIo output
• If your antenna IS a flat cable (300-ohm tWIn lead
cable), use an external antenna connector (not
supplIed) to connect the antenna to the recorder
• If you have separate cables for VHF and UHF
antennas, use a UHFNHF band mIxer (not supplIed) to
connect the antenna to the recorder
Cable box WIth an antenna output
only
B (page 19)
Cable WIthout cable box, or antenna C (page 20)
only (no cable TV)
"continued
17