Changing The Programme Sequence; Once A Programme Has Started; Changing The Programme; Cancelling The Programme And Then Selecting A Different Programme - Miele T 8903 C Operating Instructions Manual

Changing the programme sequence

Once a programme has started

- changing the programme

You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
Once a selection has been made, the
Finish/Anti-crease indicator light will
flash.
You will need to cancel the current
programme before you can select a
new one.
- cancelling the programme and then
selecting a different programme
^ Turn the programme selector to
Finish.
^ Press the Door button.
^ Close the door.
^ Select and start a new programme.
- cancelling the programme and then
removing the laundry
^ Refer to the following: "Adding or
removing laundry after a programme
has started".
^ Switch the dryer off after closing the
door.
14
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^ Add or remove items as required.
^ Close the door.
^ Press the Start button.