Table of Contents
Advertisement
(4)
Turn over the rubber cap symmetrically on the left and
right. (See Figure 4)
Caution : Take great care not to damage the anode cap.
(5)
Fit your forefinger over the projection at the center of
the cap and hold the cap between your thumb and
middle finger. (See Figure 5-1)
(6)
Apply the hook on one side to the anode button as
shown on the figure. (See Figure 5-2)
Caution : Check that the hook is held securely.
(7)
Apply the hook on the other side to the anode button
as shown in Figure 5-3.
Hook
30˚
Hook
Anode button
Anode button
Fig. 5-3
Anode button
6
Fig. 4
Fig. 5
Hook
Fig. 5-2
Advertisement
Table of Contents
