Toshiba RAS-B10UFV-E Service Manual page 99

No. Part name
Louver base 1) Remove screws for louver base.
assembly (2 pcs)
2) -
base to upward.
2) -
out in the front direction.
<Attention for louver base assemble>
Insert the rib of the louver base into the
slot of back body same as the picture.
Bell mouth 1) Remove screws for bell mouth. (4 pcs)
Drain pan and 1) Remove screws for drain pan. (2 pcs)
damper base
2) Remove screws for damper base.
(2 pcs)
Procedure
Pull the upper part of the louver
Take off the louver base by pull
Screws for louver base (2 pcs)
Screw for drain pan
– 99–
Remarks
Back body slot
Louver base rib
Screws for bell mouth
(4 pcs)
Screws for damper base
(2 pcs)
Screw for drain pan