Honda Spacy-i Owner's Manual page 64

10. Check that the sealing washer on the
drain bolt is in good condition.
Replace the sealing washer every other
a
time the oil is changed, or each time if
necessary.
11. Install the drain bolt and tighten.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
12. Fill the crankcase with the recommended
oil ( P. 44) and install the oil fill cap/
dipstick.
Required oil
When changing oil &
cleaning the strainer screen:
0.8 litres (0.8 US qt, 0.7 Imp qt)
When changing oil only:
0.7 litres (0.7 US qt, 0.6 Imp qt)
13. Check the oil level.
14. Check that there are no oil leaks.
Honda Spacy-i Owner's Manual
Engine Oil
a
P. 58
http://www.motorcycle.in.th
Changing Engine Oil,Cleaning Strainer Screen
61