Turn On Your Phone - Motorola RAZR V3c Motomanual

visible to ensure full phone functionality while
charging.
Charging from a Computer
You can charge your battery by connecting a
cable from your phone's mini-USB port to a
high-power USB port on a computer (not a
low-power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
USB high-power ports are located directly on
your computer.
Both your phone and the computer must be
turned on, and your computer must have the
correct software drivers installed. Cables and
software drivers are available in Motorola
Original data kits, sold separately.
Note: When your phone's battery is dead or
has a very low charge, you must use the
phone's charger to recharge the battery. You
cannot use a USB-cable connection to a
personal computer to charge a weak or dead
phone battery.

Turn On Your Phone

1 Open your phone.
2 Press and hold the
power key for 3
seconds.
The phone may
require several
seconds to power on.
3 If necessary, enter your 4-digit unlock
code (the last 4 digits of your phone
number) and press OK to unlock the
phone.
Getting Started 9