Table of Contents
Advertisement
3
Connect antennas (Fig. 2)
4
Connect power (Fig. 3-1)
5
Turn on (Fig. 3-2)
Press the
The product switches to the last selected source.
»
•
To switch the product to standby mode, press the
knob again.
6
Set the clock (Fig. 4)
1
In standby mode, press and hold the
»
blinks.
2
Turn the PRESET knob to select a time format, and then press
the
Hour digits blink.
»
3
Turn the PRESET knob to set the hour, and then press the
knob to confirm.
Minute digits blink.
»
4
Turn the PRESET knob to set the minute.
5
Press the
knob or turn the SOURCE knob.
(12-hour time format) or
knob to confirm.
knob to confirm.
knob for 2 seconds.
(24-hour time format)
Advertisement
Table of Contents
