Installing/Removing The Propel Back Cushion; Installing The Cushion - Invacare InTouch 1143199 Owners Operating & Maintenance Manual

Installing/Removing the Propel Back Cushion

NOTE: For this procedure, refer to FIGURE 2.5.
NOTE: To remove the cushion, reverse this procedure.

Installing the Cushion

1. Secure the hook‐and‐loop strap at the top of the cushion to the hook‐and‐loop strip
above the handgrip on the back frame.
2. Secure the cushion to the back frame with hook‐and‐loop strips on the rear of the
cushion.
Hook-and-Loop
Strap
Hook-and-Loop
Strips
FIGURE 2.5 Installing/Removing the Propel Back
Part No 1143199
Cushion
Back
Frame
13
SECTION 2—INSTALLING
Hook-and-Loop
Strips
Handgrip
™
InTouch Propel
™
Back