Basic Recording - Panasonic AG-DV1DC P Operating Instructions Manual

Basic Recording

Basic Recording
8 2
REC MENU
REC
Lamp
10
9
STOP
PAUSE
[ TV with AUDIO/VIDEO OUT Jacks ]
A/V Cable
(Supplied)
To Audio Out
[ TV with S-VIDEO OUT Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
DC Cable
(Supplied)
AV Cable
(Supplied)
To Audio Out
S-Video Cable
(Not supplied)
3, 5, 6
SET
1
POWER
3, 4, 6
+/–
(SELECT)
A/V IN
Back of TV
Audio Out Video Out
To Video Out
S-VIDEO
IN
A/V IN
Back of TV
Audio Out S-Video Out
To S-Video Out
Before you begin
• Connect this unit to a power source.
(pp. 9, 10)
• Insert a cassette with the record tab
closed. (p. 6)
1
Set the POWER to ON while pressing
the white button.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
ON position.
2
Press MENU to display the MAIN
MENU screen.
3
Press +/– to select
press SET to display the REC MODE
menu screen.
4
Press +/– to select
REC MODE menu. Press SET to
select IN. (Menu OSD: p.29)
5
Press +/– to select
press SET to select LINE.
• "LINE AV IN" will appear on the
screen.
Note
• Set LINE OUT: ON in the DISPLAY
menu to display the OSD screen on
your TV monitor.
6
Press +/– to select REC SPEED in the
REC MODE menu. Press SET to
select "SP" or "LP".
(Menu OSD: p. 29)
• Press MENU twice to exit.
7
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
8
Press (REC) to start recording.
• The REC Lamp lights red.
9
Press (PAUSE) to pause.
10
Press (STOP) to stop recording.
Note
• If left in Record/Pause for 5 minutes, this
unit will automatically go into Stop mode.
• Make sure this unit and TV are turned off
while connecting.
• Please connect the A/V Cable securely.
REC MODE , then
AV JACK in the
AUDIO SEL , then
19