Basic Playback
You can playback your recording.
180°
90°
90°
2
LCD-OPEN
3
3
REW
REW
POWER Lamp
5
4
STOP
PLAY
Connecting Earphone
(not supplied)
PHONE Jack
Playback Your Recordings
Before you begin
• Connect this unit to a power source.
• Insert a recorded cassette.
1
2
3
4
5
1
POWER
Note
• When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
• Using the LCD monitor reduces battery
operating time.
• You can place this unit on a table, etc. for
viewing. Rotate the LCD Monitor 180° and
swing it up against this unit body as
shown.
You can connect earphones (not supplied)
to the PHONE Jack.
(pp. 9, 10)
Set the POWER to ON while pressing
the white button.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
ON position.
Press LCD-OPEN to unlock the
LCD monitor and swing it fully open.
Press
(REW) to rewind the tape.
Press
(PLAY) to start playback.
Press
(STOP) to stop playback.
• When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
13