Unit Care - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Blu-ray disc player / hdd recorder
Hide thumbs Also See for Diga DMR-PWT500:
Table of Contents

Advertisement

Unit care

∫ Indemnity concerning recorded content
Panasonic does not accept any responsibility for damages
directly or indirectly due to any type of problems that result
in loss of recording or edited content (data), and does not
guarantee any content if recording or editing does not work
properly. Likewise, the above also applies in a case where
any type of repair is made to the unit (including any other
non-HDD related component).
Cleaning
∫ This unit
≥Wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this
unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
∫ This unit's lens
Use the Lens cleaner (not supplied) to clean the unit's lens.
Lens cleaner: RP-CL720AE
≥This lens cleaner may not be for sale depending on the
region.
96
VQT3C84
Setup precautions
≥Place the unit on a surface that is flat and not subject
to vibration or impact.
≥Do not place on anything that
generates heat like a VCR, etc.
≥Place in an area where
condensation does not occur.
Conditions where condensation
may occur
– When there is an extreme
change in temperature (moving
from a very hot location to a very cold location, or vice
versa, or when subjected to an air conditioner or when
cooled air directly impacts the unit).
– When there is high humidity or a lot of steam in the room.
– During the rainy season.
In the above situation, without turning the unit on, let the
unit adjust to the room temperature and wait 2–3 hours
until condensation is gone.
∫ Cigarette smoke etc. causes malfunction
or breakdown
The unit may breakdown if cigarette smoke or bug
spray/vapour, etc. gets inside the unit.
When moving the unit
Before moving the unit, ensure the disc tray is empty.
1 Turn the unit off. (Wait until "BYE" disappears from the
display.)
2 Remove the AC mains lead from the household mains
socket.
3 Move only after the unit has come to a complete stop
(approx. 3 minutes) in order to avoid subjecting to
vibration and shock. (Even after turning the unit off, the
HDD continues operating for a short time.)
DO NOT
This unit
VCR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents