Channel List; Manual Tuning - Panasonic Diga DMR-PWT500 Operating Instructions Manual

∫ Channel List

You can edit the Channel List.
Digital TV Channel List
1
2
3
4
5
6
7
Select
Hide
RETURN
Tune Swap Reveal all
≥To skip unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
≥"Yellow" : Clear the all skip setting.
≥To change the channel number assignment
1 Select the channel, then press the "Green" button.
2 Enter the channel number to reassign with the number
buttons.
3 Press [OK].
≥If another channel is already assigned to the channel
number, the two channels will be switched.
≥To set the channel manually
Press the "Red" button.
"Digital TV Manual Tuning" screen appears. (

Manual Tuning)

∫ Auto Setup
You can restart the Auto Setup. (
Select "Yes", then press [OK].
∫ Download from TV
Select "Download from TV" when you connect the unit to a
VIERA Link (HDAVI Control 3 or later) compatible TV with
an HDMI cable.
Select "Yes", then press [OK].
Channel names
right,
20)
∫ Manual Tuning
You can set each channel manually.
Digital TV Manual Tuning
Physical Channel [ ]
Signal Quality 0
Signal Strength 0
No. Channel Name
Digital TV:0
Select physical channel
Start tuning
Select offset
RETURN
1 Select the channel.
2 Adjust the frequency.
≥Adjust the frequency by checking the signal strength
and signal quality displays.
3 Press [OK] to start scan.
The set channel is displayed in the table.
∫ Update Channel List
You can update channels to the latest one.
≥This takes about 3 minutes.
Digital TV Update Channel List
Scan CH 6
This will take about 3 minutes.
RF Ch Type
Channel Name
Digital TV:0
Searching
RETURN
"Finished" is displayed when the search is finished.
Press [RETURN ].
∫ Child Lock ( Parental Rating )
You can restrict the viewing and recording of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and playback.
≥Follow the on-screen instructions.
≥PIN is required to change. (
MHz
10
10
Type New
69
Quality
74)
75
VQT3C84