Hdd / Disc - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Changing the unit's settings
∫ Signal Condition
You can check the quality and strength of signals.
Press [CH W X] to select the channel.
Signal Quality
Signal Strength
0 2 4
Network Name
RF Parameter [ ]
Good
Poor
RETURN Channel Down
Bad
Signal Quality
Red bar The signal quality is bad.
Yellow bar The signal quality is poor.
Green bar The signal quality is good.
Signal Strength
0 Signal strength is 0%.
10 Signal strength is 100%.
≥When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
∫ New Channel Message
Set whether to obtain the information automatically when a
new digital channel is added.
≥ After performing "Update Channel List" or "Manual Tuning" if the channel
number has already been assigned, channel number for the newly tuned
channel will be assigned from 800ch onward.
76
VQT3C84
6 8 10
MHz
Channel Up

HDD / Disc

Setup
HDD / Disc
HDD / Disc
Settings for Playback
Settings for Recording
HDD Management
∫ Settings for Playback
HDD / Disc
Settings for Playback
Settings for Playback
3D BD-Video Playback
Soundtrack
Subtitles
Menu
Play Video ( AVCHD ) on BD-RE /BD-R
BD-Live
BD-Video Parental Control
DVD-Video Parental Control
3D BD-Video Playback
Select the playback method of 3D compatible video
software.
Soundtrack
Select the audio language.
≥If "Original" is selected, the original language of each
disc will be selected.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
Subtitles
Select the language for subtitle.
≥If "Automatic" is selected and the language selected
for "Soundtrack" is not available, subtitles of that
language will automatically appear if available on that
disc.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
85, Language code list)
85, Language code list)