Advertisement
Metal Curved Back Assembly (16-24" Wide)
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Plastic Curved Back with a Metal Curved
Back.
54
Form No. 00-191
To order call toll free 1-800-333-6900, or www.invacare.com
Advertisement
