Advertisement
GB (TrueTrack) Heavy Duty Motors and Hardware
For Both MKIV Elec.'s Before 5/22/07 & MK6i After 5/21/07
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when
the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not
available with the Torque SP (301-351 TQHD) user weight selection until 1/26/04 when the user weight
Item #25c Warranty Replacement or Reconditioned Motor - Date Application Reference
Model and
-Right WARR RPLMT
-Right Reconditioned
-Left WARR RPLMT
-Left Reconditioned
NOTE:
A - Kit includes a GB HD Motor, Brake Lever Hardware and (Controller Gasket Connector kit). The brake release mechanism was
revised 10/29/07 eliminating the torsion spring, adding a bellville washer and
A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector was
introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
B - Kit includes a GB HD Motor, Brake Lever Hardware, (Controller Gasket Connector kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with
Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
C - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets.
D - For use on chairs with serial number series 07H and before.
E - For use on chairs with serial number series 07I and after.
Form No. 00-191
limit was raised to 400 Lbs.
Chart MK6i (After 5/21/07)
Side
To order call toll free 1-800-333-6900, or www.invacare.com
1123235E-NLA
See Note(s) A, A1, E, C
1123234E-NLA
See Note(s) A, A1, E, C
201
Part Number
See Note(s) D
1153335E
See Note(s) D
1153336E
Advertisement
