Advertisement
GB (TrueTrack) Non-Heavy Duty Motors and Hardware
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when
the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not
available with the Torque SP (301-351 TQHD) user weight selection until 1/26/04 when the user weight
Item #1b Warranty Replacement or Reconditioned Motor - Date Application Reference
Model Number and
Side
-Left Reconditioned
-Left WARR RPLMT w/
Wheel Lock
Torque SP
-Right WARR RPLMT
-Right Reconditioned
-Right WARR RPLMT w/
Wheel Lock
-Left WARR RPLMT
-Left Reconditioned
-Left WARR RPLMT w/
Wheel Lock
NOTE:
A - Kit includes a GB HD Motor, Brake Lever Hardware and (Controller Motor Gasket Connector kit). The brake release mechanism
was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and
A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector was
introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.
B - Kit includes a GB HD Motor, Brake Lever Hardware, (Controller Motor Gasket Connector kit) and
B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with
Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm
C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.
Refer to the Suspension Arm Kits chart
E - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets.
F - For use on chairs with serial number series 07H and before.
G - For use on chairs with serial number series 07I and after.
H - Part is no longer available as a service part. The Customer will need to upgrade to Heavy Duty TrueTrack GB Motors. A new
upgraded Base Only with MK6i Electronics must be ordered through the Equipment Configurator. If the Customer
H1 - has MKIV Electronics on the wheelchair with power seating then a whole new base and power seating is required.
NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when the TTHD GB motors covered all
Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (301-351 TQHD) user weight selection until
1/26/04 when the user weight limit was raised to 400 Lbs.
Form No. 00-191
For MKIV Electronics Only
limit was raised to 400 Lbs.
Before 2/6/03
See Note
See Note(s) H1, H
N/A
TRUTK (Non-Heavy Duty)
Optional
N/A
See Note
See Note(s) H1, H
N/A
N/A
See Note
See Note(s) H1, H
N/A
To order call toll free 1-800-333-6900, or www.invacare.com
Chart
2/6/03-1/25/04 and
(2/6/03-3/14/04 For VA
Gov't Orders)
See Note
See Note(s) H1, H
N/A
TRUTK (Non-Heavy Duty)
Optional
N/A
See Note
See Note(s) H1, H
N/A
N/A
See Note
See Note(s) H1, H
N/A
189
1/26/04-5/21/07 and
(3/15/04-5/21/07 For VA
Gov't Orders)
1153336E
See Note(s) G, E, D, A1, A
1153649E
See Note(s) B1, E, B, G
TRUTK (Heavy Duty)
Optional
1123235E-NLA
See Note(s) F
1153335E
See Note(s) G, E, C, A1, A
1153648E
See Note(s) B1, E, B, G
1123234E-NLA
See Note(s) F
1153336E
See Note(s) G, E, D, A1, A
1153649E
See Note(s) B1, B, G, E
Advertisement
