Table Of Contents; Thank You For Choosing One Of Our Products. We Hope That You Will Be Completely Satisfied With This; Machine And That It Fully Meets Your Expectations. This Manual Has Been Compiled In Order To Provide; You With All The Information You Need To Get Acquainted With The Machine And Use It Safely And Effi - GGP ITALY SPA 31 Operator's Manual

INTRODUCTION
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satisfied with this
machine and that it fully meets your expectations. This manual has been compiled in order to provide
you with all the information you need to get acquainted with the machine and use it safely and effi-
ciently. Don't forget that it is an integral part of the machine, so keep it handy so that it can be con-
sulted when necessary, and pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance with current regulations, and is
safe and reliable if used in compliance with the instructions provided in this manual (proper use). Using
the machine in any other way, or non-compliance with the safety specifications relative to use, main-
tenance and repair is considered "improper use" which will invalidate the warranty, relieve the manu-
facturer from all liabilities, and the user will consequently be liable for all and any damage or injury to
himself or others.
Since we regular improve our products, you may find slight differences between your machine and the
descriptions contained in this manual. Modifications can be made to the machine without notice and
without the obligation to update the manual, although the essential safety and function characteristics
will remain unaltered. In case of any doubts, please contact your dealer. And now enjoy your work!

TABLE OF CONTENTS

1. Identification of the main components ........................................ 2
2. Symbols........................................................................................ 3
3. Safety requirements ..................................................................... 4
4. Machine assembly........................................................................ 6
5. Preparing to work......................................................................... 8
6. How to start - Use - Stop the engine .......................................... 9
7. Using the machine ..................................................................... 11
8. Maintenance and storage........................................................... 14
9. Troubleshooting .......................................................................... 16
10. Technical data ............................................................................ 17
1
EN