Headlamp Control; Key Positions - Volvo V60 Plug-in hybrid 2012 Quick Manual

headlamP ContRol

Main beam flash
A
Main/dipped beam switching and Home
B
safe light duration
Display and instrument lighting
Rear fog lamp, the light only illuminates
on the driver's side
Automatic /deactivated dipped beam.
A
Main beam flash working but not fixed
main beam
Parking lamps
Dipped beam. Switches off when the
engine is switched off. Main beam can be
activated
Opens petrol tank cap
Manual headlamp levelling (automatic for
Xenon lights*)
Unlocking of tailgate
Warning lamp, switching to dipped
beam, tunnel detection*, full beam
with automatic activation*
A
Certain markets.

key Positions

In order to reach the following key positions
without the engine starting: Do not depress
the brake pedal.
0Unlock the car.
iWith the remote control key fully inserted
into the ignition switch: Briefly press staRt/
stoP engine.
ii With the remote control key fully inserted
into the ignition switch: Press staRt/stoP
engine for approx. 2 seconds.
Key position ii consumes a lot of current from
the battery and should therefore be avoided!
See also the table in the section "key posi-
tions" in the normal owner's manual for the
car for information on the functions/systems
that can be used with the engine switched off
in different key positions.
To return to key position
staRt/stoP engine
Briefly press
switCh off the engine and
Remove the key
The engine is switched
off when the figures in the
speedometer or tachom-
eter and side gauge
extinguish.
0 ii
from position and
.
Briefly press the button
– the engine stops.
Pull the remote control
key out from the igni-
tion switch.
i
: