Samsung ML-7300 User Manual page 49

JOB MENU
Item
DUP.TOP
DUP.LEFT
S-BIND
L-BIND
FUSER CLEAN
3.14
U O P
SING PERATOR ANEL
Values and Functions
5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the top margin of the print
materials when the Duplex menu item is set to Long.
5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the left margin of the print
materials when the Duplex menu item is set to Long.
0 (Factory Default)
0~22mm (In increments of 1)
This item lets you select the left margin for the binding
when short edge duplexing.
0 (Factory Default)
0~22mm (In increments of 1)
This item lets you select the left margin for the binding
when long edge duplexing.
Select 'FUSER CLEAN' if you notice random dirty spots on
the back side of the paper.
It cleans fuser contamination.