Changing Printer Setting
To change an operator panel setting, proceed as follows.
1
Make sure the 'READY' message appears on the display.
2
Press On Line.
Result:
3
Press Menu until the menu you need appears on the display.
4
Press Item until the menu item you need appears on the display.
5
Press Value until the setting you need appears on the display.
6
Press Enter to save the selection.
Result :
A value can be :
• A phrase or word that describes a setting.
• A numerical value that you can increase or decrease.
• An On or Off setting.
The 'OFFLINE' message appears on the display and the
printer is off-line.
An asterisk( ) appears beside the current user default
setting for that menu item.
3.3
U
O
P
SING
PERATOR
ANEL