Advertisement
When ordering a Spoke Wheel with Handrim attached, the standard rim mounting
process uses the outside holes of the handrim mounting tabs. To use the inside holes
to reduce the overall width of the chair, you must order the wheel and handrim
Wheel Style
Tire Type
700SP
Umma Gumma
NOTE:
A - As of 7/15/02 Spinergy Wheels now have 18 spokes instead of 30. For chairs built Before 7/15/02, it is recommended when one
wheel is requested that the wheels be replaced in pairs.
B - As of 11/8/02 these wheels now have a Black finish. For chairs built Before 11/8/02, it is recommended when one wheel is
requested that the wheels be replaced in pairs.
C - As of 11/17/08 Spinergy Wheels changed from black spoke, black hub to a black spoke, silver hub appearance. For chairs built
Before 11/17/08, it is recommended when one wheel is requested that the wheels be replaced in pairs.
When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the outside holes of the handrim mounting
tabs. To use the inside holes to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order.
Form No. 00-131
Spoke Rear Wheels (w/ Handrims)
(Before 9/2/11)
assembled as a special order.
Anodized
Aluminum
1115634
See Note(s) B
To order call toll free 1-800-333-6900, or www.invacare.com
Grey
Black
Plastic Coated
Plastic Coated
1049553-NLA
N/A
48
8 Vertical
8 Oblique
Projection
Projection
N/A
N/A
Advertisement
