Salus ERT30 UP Instruction Manual page 51

2. To change a setting: Press and hold - and +
at the same time. While you are holding these
keys, the setting screens will appear in the
following order:
• Frost Protection mode.
• Offset setting.
• Floor Limit setting.
When you see the setting screen you want to
change, release the keys.
Increase or decrease a setting by pressing
– or +. To confirm or leave the setting mode
and return to the normal display, do not touch
any keys for a few seconds.
TIP: Press and hold – or + to quickly move
through the temperature values.
GB
48