Advertisement
2. Install the mounting plate in either the Complete System Shelter, Multi-Purpose Shel-
ter, or on the wall of a shed or similar structure.
To install in the Complete System Shelter, secure the
mounting plate to the wall of the shelter using the double-
sided foam (which is pre-installed on the back of the plate),
as shown below.
To install in the Multi-Purpose Shelter, use the #6 x 3/8"
and #4 x 3/8" self tapping screws to secure the mounting
plate to the shelter in the location shown below.
To install on the wall of a shed or similar structure, use the
#6 x 3/4" wood screws, as shown below.
Mounting in Complete System Shelter
on Back of Mounting Plate
1-1/4"
Door of Complete System Shelter
Installation
Double-Sided Foam Tape
Mounting On Wood Surface
#6 × 3/4" Wood Screws
Mounting in Multi-Purpose Shelter
#4 x 3/8" Self-
Tapping Screw
#6 × 3/8" Self-Tapping Screw
Page 21
Advertisement
