Advertisement
C
T
ONFIGURING
As shipped from the factory, the radio modem (RM) may not be compatible
with your WeatherLink. Follow the instructions below to configure the RM.
Connect the RM to your Computer
The first part of the procedure requires you to connect the RM to your computer.
1. Connect the PC COM Port Adapter to a serial port on your PC.
2. Connect one end of the modular cable to the PC COM Port Adapter.
3. Connect the PC RADIO DB-25 Adapter to the DB25 connector on the RM.
4. Connect the other end of the modular cable to the PC RADIO DB-25 Adapter.
Modem
(RM)
PC RADIO
DB-25 Adapter (L2)
Power the RM
Provide power to the RM by plugging the power adapter into the power jack
on the RM and then into a power outlet.
MODEM
(RM)
Configuring The Radio Modem
R
M
HE
ADIO
ODEM
(PC RADIO DB-25
Adapter not shown)
Modular
Cable
Power
Adapter
PC Com
Port
PC
PC COM Port
Adapter
Page 11
Advertisement
