Effects Preset List - Tascam DR-05 Reference Manual

LEVEL:
Use this to change the output level of the preset
effect selected in the
Setting range: -
0 20
SOURCE:
Use this to set whether the effect is applied to
the input signal (
INPUT
( ).
OUTPUT
The default setting is
4 Use the + or – button to select the desired
item and press the
to access that item's settings.
5 Use the + or – button to set the desired value.
Â
6 Press the button when you are done
making the setting to return to item selection
status.
7 Press the (HOME) [
the Home Screen.
CAUTION
item.
PRESET
) or the output signal
.
OUTPUT
Á
button or button
¯
ª
] button to return to
8-Using the Effects
When the sampling frequency is set to 96 kHz, or a WAV file
with a sampling frequency of 96 kHz is played, the built-in
effects do not work.
However, you can still set the built-in effects.

Effects Preset List

Preset name Effects
This is a bright reverb modeled
Default)
HALL 1 (
after a large hall-like space.
This is a warm reverb modeled
HALL 2
after a large hall-like space.
This reverb is modeled on a
ROOM
small indoor space.
This reverb is modeled on a
STUDIO
studio-like space.
PLATE 1 This is a bright plate reverb.
PLATE 2 This is a warm plate reverb.
87
TASCAM DR-05