Table of Contents
Advertisement
Managing Ports in Access Gateway mode
This chapter explains how to use the CLI to manage the ports on Brocade Access Gateway.
NOTE
Refer to the Web Tools Admin Guide for information on setting up Access Gateway using Web Tools.
In this chapter
Determining the mapping and port status
This section explains how to display the current mapping and port status.
DISPLAYING THE PORT MAPPING
This section explains how to display the mapped routes of the host connections to the fabric on
Brocade Access Gateway. F_Ports are mapped to N_Ports.
See the Fabric OS Command Reference for more details on using the ag command with the
mapshow operand.
--
To display all mappings
1. Connect and log in to the switch.
2. Enter the ag
N_Port
Configured F_Ports
Current F_Ports
Failover and Failback
Access Gateway Administrator's Guide
53-1000633-01
•
Determining the mapping and port status . . . . . . . . . . . . . . . . . . . . . . . . . . 17
•
Configuring port maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
•
Managing the failover and failback policies . . . . . . . . . . . . . . . . . . . . . . . . . 21
•
Configuring additional F_Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
mapshow command without any options to display all the mapped ports.
--
Port numbers of ports locked in N_Port mode.
List of F_Ports that are mapped to the corresponding N_Port; for
example: F_Ports 9 and 10 are mapped to N_Port 0.
Shows the F_Ports that are currently connected to the fabric on the
corresponding N_Port.
In the case of failover, the Current F_Port and Configured F_Ports
differ. For example, ports 9 and 10 are mapped to 0, however 0 is
offline, therefore 9 and 10 failed over to 22 and 23.
Indicates whether or not N_Port policy is enabled (1) or disabled (0).
Chapter
4
17
Advertisement
Table of Contents
